0513 - 88220022

 The numerical control equipment such as the Nantong flying standard shearing machine is relatively fine, and there is no mistake in the production, so we must do the maintenance work of the bending shearing machine. Today, Nantong Flying Standard Co., Ltd. will once again explain the maintenance and maintenance of the shearing machine. 1) Check the oil level of the fuel tank every week. If the hydraulic system is repaired, check it. The oil level should be filled with hydraulic oil below the oil window. 2) After the new machine is working for 2000 hours, the oil should be changed. After each operation, 4000 to 6000 hours. After the oil should be changed, the oil tank should be cleaned every time; 3) The system oil temperature should be between 35 °C and 60 °C, and should not exceed 70 °C. If it is too high, it will cause deterioration of oil quality and accessories. 4) Whenever the oil is changed, the filter should be replaced or thoroughly cleaned; 5) The machine has related alarms or other oil abnormalities such as oil and other abnormalities, which should be replaced; 6) The air filter on the fuel tank is carried out every 3 months. Check the cleaning, preferably 1 year replacement. 7) Clean the hydraulic components (substrate, valve, motor, pump, oil pipe, etc.) every month to prevent dirt from entering the system, and do not use detergent; 8) After using the new machine for one month, check the bending of each tubing for deformation, such as Abnormalities should be replaced. After two months of use, the joints of all accessories should be tightened. Shut down when performing this work, and the system is not under pressure.

  Our company provides on-site maintenance services and charges a reasonable fee.


More please pay attention to www.jsyj.com

About Us

Nantong Flying Standard Machine Tool Technology Co., Ltd. is a key backbone enterprise in the national forging machinery industry. The company is located in the famous town of Jiangsu in the economically developed Yangtze River Delta - Hai'an Town, which enjoys the "hometown of cutting machine tools". The Xinchang Railway and the Ningqi Railway meet here. The coastal high-speed, Jianghai Expressway, 204 National Highway and 328 National Highway are all connected within one and a half hours. The traffic is very convenient.

Contact Us
  • Email:info@jsyj.com
  • Sales Hot-line:0513-88220022
  • After-sale:0513-88220011
  • Fax:0513-88220033